Sửa lỗi the diagnostics policy service is disabled năm 2024

Dường như kết nối mạng trên máy tính Windows không tốt. Có thể khắc phục sự cố mạng thông qua Windows Network Diagnostics. Nhưng thật không may, The Diagnostics Policy Service không chạy:

The Diagnostics Policy Service không chạy

Hướng dẫn nhỏ này sẽ giải quyết vấn đề trên Windows.

Diagnostics Policy Service là gì?

Diagnostics Policy Service cho phép phát hiện sự cố, khắc phục sự cố và giải quyết các thành phần Windows trên hệ điều hành Windows. Nếu dịch vụ này không chạy, chẩn đoán sẽ không hoạt động nữa.

Làm cách nào để khắc phục Diagnostics Policy Service không chạy?

Dưới đây là 3 giải pháp dễ dàng và hữu ích mà chúng ta có thể thử. Không nhất thiết phải thử tất cả; Chỉ cần bắt đầu từ đầu và làm theo cách bạn muốn cho đến khi vấn đề được giải quyết.

  1. Kiểm tra Diagnostics Policy Service trong cửa sổ Services
  2. Cung cấp dịch vụ mạng và đặc quyền quản trị dịch vụ cục bộ trên Windows
  3. Cài đặt lại driver cho card mạng

Giải pháp 1: Kiểm tra Diagnostics Policy Service trong cửa sổ Services

Vì thông báo lỗi cho biết rằng dịch vụ không chạy, giải pháp nhanh đầu tiên là kiểm tra trạng thái dịch vụ trong cửa sổ Services.

Làm theo các bước sau:

  1. Trên bàn phím, nhấn phím biểu tượng Windows và R [cùng một lúc] để gọi lệnh Run.
  1. Gõ services.msc và nhấn OK .
  1. Xác định vị trí Diagnostics Policy Service, bấm chuột phải vào nó để chọn start, nếu start chuyển sang màu xám, bấm khởi động lại.
  1. Nhấp chuột phải vào Diagnostics Policy Service lần nữa và lần này chọn Properties
  1. Đặt Startup type thành Automatic. Sau đó nhấp Appky > OK .
  1. Chạy Network Diagnostics và xem nó có hoạt động tốt không.

Giải pháp 2: Cung cấp dịch vụ mạng[network service] và đặc quyền quản trị dịch vụ cục bộ[local service administrator] trên Windows

Vấn đề này có thể là do dịch vụ không có quyền truy cập để chạy thích hợp. Chúng ta có thể dễ dàng sửa chữa nó bằng cách cho đặc quyền quản trị dịch vụ.

  1. Nhập cmd vào hộp tìm kiếm từ menu Start. Sau đó kích chuột phải vào Command Prompt hoặc cmd.exe để chọn Run as administrator .
  1. Nhập các lệnh sau và nhấn Enter sau mỗi lệnh.

net localgroup Administrators /add networkservice

net localgroup Administrators /add localservice

Bạn sẽ thấy lệnh này đã hoàn tất thành công.

  1. Đóng cửa sổ Command Prompt và chạy Network Diagnostics để xem nó có hoạt động tốt không.

Giải pháp 3: Cài đặt lại Driver Card mạng

Lỗi này cũng có thể do Card mạng bị trục trặc. Thử cài đặt lại Card mạng để giải quyết nó.

  1. Trên bàn phím, nhấn phím biểu tượng Windows và R [cùng một lúc] để gọi lệnh Run.
  1. Gõ devmgmt.msc và nhấn OK .
  1. Nhấp đúp vào Network adapters và nhấp chuột phải vào Network adapters từng cái một [nếu có nhiều hơn một] để chọn Uninstall device.

4) Nhấp vào Action > Scan for hardware changes. Microsoft sẽ tự động tải lại trình điều khiển Card mạng.

  1. Chạy Network Diagnostics để xem nó có hoạt động tốt hay không. Nếu nó vẫn cho lỗi, hãy cài đặt card mạng mới nhất.

Sometimes, there was showing no internet access or limited connectivity on the wireless icon. When you tried to diagnose the network problem, there was a “The Diagnostics Policy Service is not running” error on your screen. Read this post from MiniTool to get the methods.

On This Page :

Diagnostics Policy Service Is Not Running

If the “Diagnostics Policy Service is not running” error appears, the troubleshooter will stop and can’t resolve the network issue. Through the Diagnostic Policy Service, you can perform problem detection, troubleshooting and resolution of Windows components on Windows operating systems.

Diagnostics will no longer function if Diagnostics Policy Service is not running. Some misconfigurations of the system will cause this error. Next, here are some methods to fix the “Diagnostics Policy Service is not running” error.

How to Fix Diagnostics Policy Service Is Not Running Error?

Method 1: Check Diagnostics Policy Service

You should check if the Diagnostics Policy Service is running or not before starting to update your drivers or execute commands in Command Prompt. Here is how to check it.

Step 1: Press the Windows + R keys to open the Run dialogue box, then type services.msc and click OK.

Step 2: Navigate to Diagnostic Policy Service, then right-click it and select Properties.

Step 3: Set the Startup type as Automatic and click the Start button.

Step 4: Click Apply to save changes and exit.

Now try launching the troubleshooter again and see if the error is fixed or not. If not, you can try the next method.

Method 2: Grant Administrator Privileges to Different Modules

Sometimes your Diagnostics Policy Service cannot start because “network service” and “local service administrator” don’t have administrative privileges. Thus, the second method is to grant administrator privileges to different modules. Here is the tutorial.

Step 1: Press the Windows + S keys, type cmd in the dialogue box, then right-click it and choose Run as administrator.

Step 2: Once in the elevated command prompt, perform the following commands:

net localgroup Administrators /add networkservice

net localgroup Administrators /add localservice

Then you can close the command prompt and try running the diagnostics again. If it doesn’t work, try the next method.

Method 3: Reinstall the Network Adapters

You can reinstall the Network adapters to fix the “Diagnostics Policy Service is not running” error.

Step 1: Press the Windows + R keys to open the Run dialogue box, then type devmgmt.msc and click OK.

Step 2: Navigate to Network adapters and expand it, then right-click adapter that causes your problem and click Uninstall device.

Step 3: Right-click any empty space in the Device Manager and select Scan for hardware changes.

Then the network adapter will be installed automatically. Now you can check if you can access the Internet properly.

Tip: After installing the default drivers, you can also update them to the latest version by right-clicking the hardware and selecting Update driver. You can either update automatically or manually.

Method 4: Perform System Restore

If the above methods don’t work, you can try performing a system restore, read this post – What Is System Restore Point and How to Create It? Solutions Are Here!

Final Words

When your computer has limited network connectivity, the “Diagnostics Policy Service is not running” error will appear. You can use the methods mentioned above to fix this error.

About The Author

Position: Columnist

Having been an editor at MiniTool since graduating college as an English major, Daisy specializes in writing about data backups, disk cloning, and file syncing as well as general computer knowledge and issues. In her free time, Daisy enjoys running and going with friends to the amusement park.

Chủ Đề