Tier 3 vs Tier 4 data center
|
Skip to content
 Enterprise-level processes, technology and strategy for small and medium businesses. Outsourced services, all supported by members of the Impact team. Show
IT & Cloud Cybersecurity Digital Innovation Marketing & Branding Print & Documents Company Careers ResourcesData Center Tiers: What Are They and Why Do They Matter?Data Center Tiers ExplainedData center tiers are established rankings for the performance of servers which house data and information. The tier of the data center you utilize dictates the level of security and how much potential downtime you could experience over the course of a year. Data centers are ranked from I to IV, with I being the worst-performing of the four and IV being the best-performing.
SMBs have been falling victim more frequently to attack and, because of this, ensuring business continuity is a major concern for decision makers and executives. After all, the cost of downtime for SMBs is crippling, and often fatal—50% of all businesses don’t have the budget to recover from a breach of their data. Put simply, where you keep your data matters, and with so many businesses migrating their company data to the cloud, it’s important to know the distinction between the servers that look after your information. Today we’re going to be taking a look at how the different tiers stack up against each other, what it means for SMBs, and the data center tier rating system as a whole. What Determines the Data Center Tier Standard?The Uptime Institute’s Tier Certification is the independent measure through which ratings are judged. It determines the criteria for each tier and lists several values that collectively make up what constitutes the standards of data center tiers. Key factors include:
Data Center Tier RatingsNow we’ve gone over the purpose of data center tier ratings, let’s take a look at each individual rating and see what you can expect from each one in terms of uptime and redundancy. Below are the listed data center redundancy tiers as outlined by the Uptime Institute with their data center tier classification system. Tier 1 Data Center (Basic capacity)A Tier I data center is the lowest-rated tier. It’s above putting a stack of servers in a closet in your office, but as far as performance goes, Tier I is at the bottom of what you can get from data center tiers. This is because a data center adhering to Tier I standards can only guarantee an uptime of 99.671% and lacks IT equipment that supports redundancy.
Tier I data centers require no redundancy, meaning they don’t have to offer basic backup needs, like a simple power and cooling setup and Uninterrupted Power Supply (UPS), and they fall short of the standards of the other tiers. They are typically best suited to very small businesses looking for an affordable option. There can be up to 1729 minutes of annual downtime. Tier 2 Data Center (Redundant capacity components)Tier II data centers offer all the capabilities of Tier I, but with added redundancy options. Like Tier I, Tier II systems will have a single power input, but with additional fail-safes for backup. These fail-safes include UPS modules, chillers, pumps, and energy generators. Tier II centers offer a marginally higher uptime of 99.741%, which translates to no more than 1361 minutes a year. Tier I and Tier II can be thought of as similar in most respects, with Tier II being the more robust of the two. Both types of data centers lack the performance capabilities found in Tiers III and IV, but still offer a good balance of performance and affordability. Much like Tier I, Tier II data centers are commonly utilized by small businesses that want a cost-effective option for their data storage needs. These data centers are not totally redundant, but they are more reliable and secure than Tier I alternatives. Tier 3 Data Center (Comprehensive redundancy)This is where data center tiers start to get a little more serious. SMBs generally prefer to use at least a Tier III-rated system for the far superior redundancy protections offered. There is a significant jump in uptime from Tier II, with Tier III offering annual uptime of 99.982%. This means that your network will experience a maximum of 95 minutes downtime per year. The improved times owe to the requirements for more comprehensive redundancy capabilities. Whereas Tiers I and II only require one path for power and cooling, Tier III requires an additional redundant path for backup which kicks in in the event of failure.
Tier III systems are not totally redundant, due to them often being reliant on or sharing components which are not fully independent to the data center—effectively meaning that it could be adversely influenced by external mishaps. This is the case for Tiers I, II, and III. These types of data centers are favored by SMBs whose IT operations need additional fail-safes over those basic protections offered by the lower tiers. Tier 4 Data Center (Fault tolerant)Tier 4 data center security marks the highest standard for data centers—usually utilized by businesses that require constant availability, which is most businesses today. They have an uptime of 99.995%, meaning annual downtime of no more than 26 minutes. They also feature 2N and 2N+1, fully redundant infrastructure—the main difference between Tiers III and IV.
All components are supported by two generators, two UPS systems, and two cooling systems. Each path is independent of each other, meaning that a single failure in one will not cause a domino effect with other components, as is the case with lower tiers. Tier IV data centers have a power outage protection of 96 hours, and this power must not be connected to any external source and must be independent. This is what’s referred to as “fault tolerance”—a capability which means that in the event of a system failure, IT operations aren’t affected in any way. Unlike Tier III, Tier IV data centers are prepared for unplanned maintenance—businesses which use Tier IV systems will often be unaware that an outage has taken place at all. Data Center Tiers by Uptime
Data Center Tiers: Which Is Right for You?What data center tier is appropriate for your organization largely depends on your security, availability, and budget needs. Businesses that host extensive data sets—particularly if the data pertains to customers—are prime candidates for the advanced protections offered by Tier III and Tier IV data centers. These will often be SMBs for whom the protections of the two lower tiers don’t provide adequate coverage. If efficiency is your concern, then Tier III is the lowest data center tier that provides the services you need without having to worry about the more significant downtime that can occur with I and II. Tier IV is recommended for businesses which value total protection, uninterrupted availability and for whom budget constraints aren’t as tight. At Impact Networking, we only work with Tier III and Tier IV servers for our clients, as we believe the protections afforded by the lower tiers aren’t adequate for the needs of modern businesses as regards full data protection. If you’re interested in partnering with a managed service provider for your IT who can securely safeguard your business data with the very best data centers, take a look at our Managed IT solution and get in touch with a specialist. Subscribe to our blog to receive more insights into business technology and stay up to date with marketing, cybersecurity, and other tech news and trends (don’t worry, we won’t pester you). RecommendedSubscribeSign up to receive updates on the latest content, articles and videos from Impact. What is the difference between Tier 3 and Tier 4 data center?Tier 3 systems have an uninterruptible power supply (UPS) as an N + 1. This effectively means that the center maintains the typical system while still having another available for backup. However, a Tier 4 system expands on this. Tier 4 systems have 2N + 1 functionality.
What is a Tier 3 datacenter?A Tier 3 data center is a location with redundant and dual-powered servers, storage, network links and other IT components. It is one of the most commonly used data center tiers, where IT components are powered with multiple, active and independent sources of power and cooling resources.
What is a Tier 4 data center?Tier 4: A Tier 4 data center is built to be completely fault tolerant and has redundancy for every component. It has an expected uptime of 99.995% (26.3 minutes of downtime annually).
What is a Tier 5 data center?Tier 5 builds on and surpasses the resiliency and redundancy found in other data center rating systems, and evaluates more than 30 additional key elements including: internet connectivity, carrier services, physical security, and sustainability.
|
