Dell USB-C not charging laptop

Laptops are sturdy pieces of hardware and generally durable no matter what you put it through. However, there may be times when youll notice your laptop not charging at all. When that happens, there are several ways to mitigate disaster.

If youre the owner of a Dell laptop and have a problem with charging, look no further. Below, youll find a variety of methods to get your laptop to start charging again. Well address common symptoms and possible solutions.

Dell Laptop Not Charging No Light

Dell laptop AC adapters have LED lights to indicate your laptop is receiving a charge. If you plug it into a power socket and connect the charging end to your laptops charging port, it should light up. Occasionally, the LED is off or turns off when you connect the charger to the computer.

There are several reasons this may happen, such as:

  • Damaged charger
  • Faulty wall outlet
  • Damaged cable
  • Faulty connector

Follow these troubleshooting steps and to pinpoint the possible cause for a charger malfunction:

  1. Check the AC adapter, cables, and charging port for damage.
  2. Ensure the power outlet is working.
  3. Disconnect and reconnect the power cables and the AC adapter.
  4. Separate and reattach the cables of the charger from the charging brick.
  5. Plug the charger back into the laptop.
  6. Check if the LED indicator is lit up.

If the wall outlet is working, but the LED indicator doesnt light up, you may have to buy a new charger. This phenomenon doesnt usually indicate a faulty port, but you should be prepared for the possibility.

You can run a Dell ePSA hardware diagnostic test to troubleshoot the issue further. Here are the steps:

  1. Turn your laptop on.
  2. Tap F12 repeatedly until the One Time Boot Menu pops up when you see the Dell logo.
  3. Use the arrow keys and highlight Diagnostics before pressing the Enter key.
  4. Follow the instructions.
  5. Write down the exact error code if there is one.
  6. Contact Dell Technical Support for further assistance.

Dell Laptop Not Charging With USB-C

Some Dell laptops have USB-C chargers instead of other proprietary pin designs. These laptops already ship with a designated charger, which can be replaced. However, when it malfunctions, its usually due to a faulty USB-C port or the motherboard.

Here are some ways to potentially solve the problem:

  1. Ensure the wall outlet is working.
  2. Disassemble and reassemble the charger [if possible].
  3. Unplug and reinsert the charger.
  4. Check if its charging.

If these steps dont help, you can try flipping the USB-C cable upside down. Should any other actions not work, the issue is likely the port or motherboard, and youll have to send it in for repairs.

Dell Laptop Not Charging Through Docking Station

Some Dell laptops can be charged via USB-C or the included charging cable connected to a docking station. These devices are designed to increase productivity by connecting all essential peripherals to one place. Should you discover your laptop isnt charging when plugged into the docking station, there are a few ways to address the issue.

Before we get into the fixes, here are potential reasons your laptop isnt charging through the docking station:

  • Your laptops charger has the wrong wattage
  • The charging cables are loose
  • BIOS issue
  • Improper connection

To diagnose the issue, follow these steps:

  1. Check if the docking station is working.
  2. Unplug the charging cable.
  3. Plug it back into the docking station.
  4. Check if your laptop is charging.

Since you dont need the charging brick, it doesnt come into play here.

Using different wattages will prevent charging, and youll have to use another docking station if thats the case. Of course, loose cables and an improper connection can be fixed by following the steps above. Reattaching everything tends to solve loose connections.

In other cases, a BIOS update can cause issues with the charger, making it impossible for your laptop to detect it. Should that happen, you may have to perform a BIOS update. These are the steps to perform a manual update:

  1. Go to the official Dell website.
  2. Find your Dell laptop model.
  3. Pick your operating system.
  4. From Category, select BIOS.
  5. Find the latest System BIOS version.
  6. Download the file.
  7. Locate and run the installer.
  8. Follow the installers instructions.
  9. After your computer restarts, your BIOS should be updated.

BIOS updates can solve driver issues but wont fix hardware. If this solution doesnt work, its most likely any of the options mentioned above.

Dell Laptop Not Charging When Turned Off

You expect your laptop to charge when plugged in, especially when its turned off. However, some users experience situations where they cant start their computer without using the charger. And when it turns on, it may display 0% battery remaining.

One possible culprit may be the microchip Dell uses to detect genuine batteries. The chip may malfunction and not detect the battery. Fortunately, theres a fix for this situation.

Depending on your laptop model, you may need tools, but the solution will take less time if you can remove the battery immediately.

  1. Drain the battery by pressing and holding the power button for 30 seconds.
  2. Remove the laptop battery.
  3. Turn the laptop on after plugging in the charger.
  4. Shut the laptop down and remove the power cord.
  5. Reinsert the battery.
  6. Plug the charger in again.
  7. Reboot the computer.

If done correctly, youll reset the microchip inside your Dell laptop. However, if youre not confident in doing this yourself, especially with a fixed battery, you can bring it to a store for repairs.

Dell Laptop Not Charging to 100%

A fully-charged battery is what people would expect after several hours of charging, but sometimes problems arise from extended use. A laptop battery used often will wear out eventually, and one symptom is not reaching a 100% charge after a long time.

It might only reach 90% or more, but never full. Thus, youre missing out on about half an hour of battery life.

Fortunately, theres an easy fix for this scenario. Here are the steps:

  1. Drain your laptop battery until its less than 10%.
  2. Shut down.
  3. Charge your laptop.
  4. After several hours, come back and turn the laptop on.
  5. It should reach 100%.

Sometimes, the battery is not at fault but the driver. A quick uninstall and reinstall may solve the problem in this case:

  1. Press Windows + R keys.
  2. Type devmgmt.msc in the dialog box and press Enter.
  3. In the Device Manager, look for the Batteries option.
  4. Click on the > or + sign.
  5. Right-click on Microsoft ACPI-Compliant Control Method Battery.
  6. Click Uninstall.
  7. Confirm the choice.
  8. Restart your laptop.

Of course, there are other causes, such as problematic AC adapters and more. You can always troubleshoot to pinpoint the exact cause of the issue.

Say Goodbye to Battery Issues

Most of the time, battery and charging issues require replacement chargers or hardware. In the best cases, some problems can be addressed at home with the help of tools. However, always consult a professional for the best course of action when in doubt.

Have you ever encountered any of these problems? Which solution worked best? Let us know in the comments section below.

Video liên quan

Chủ Đề