What are the two types of cables used in networking?

In the 21st century, the ideal goal would be to eliminate the use of networking cables completely and live in a world where everything is managed wirelessly. Without any more cables to trip over, managing servers would be far easier, and we wouldn’t have to waste time labeling and following hundreds of cables. Until that time arrives, we are stuck with using old-fashioned networking cables to set up our servers, transfer important data, and operate the machinery that is essential for running our businesses. As such, it is useful to have a general understanding of the types of cables that are currently being used and the purpose that they serve in the IT industry.

Twisted Pair Cables

These are the cables that are used most frequently for Ethernet purposes. They are called “twisted pair” because there are pairs of wires in the cable that are twisted together. This is done to prevent electromagnetic interference from outside sources and other wire pairs in proximity. There are two main classifications of twisted pair cables: The first one is Shielded Twisted Pair (STP) and Unshielded Twisted Pair (UTP).  STPs have an extra layer of shielding to make them more resistant to outside interference, and, thus, have an improved ability to maximize bandwidth in comparison to UTPs. The drawback to this is that they are far heavier and cost more, which is why their primary use is within high-end applications where prevention of interference is a top priority. The second classification has to do with categories that are separated from one another on the basis of data transfer per second. The categories in standard use are Category 5e (1 Gbps) and Category 6 (10 Gbps), as the older categories have become outdated due to performance standards that do not meet the modern-day demands of the IT industry.  

Coaxial Cables

For those of you who grew up a few decades ago, you would have seen these cables in use to connect TVs to home antennas and set up the very first Ethernet networks. They work by having a copper wire covered by insulation and other forms of shielding. In addition to their heavy weight and thickness, their less-than-stellar data transfer rates (10 Mbps) led to them being phased out when twisted pair cables came into use. These cables are outdated in their use, but they are included in this article because some buildings may still use these ancient cables.

Fiber Optic Cables

These cables work much differently from the ones that have been described thus far. A thin cylinder of glass is surrounded by multiple layers of coating that provide protection and prevent interference. Unlike the other cables, fiber optic cables transmit data using pulses of light. While these cables may be more expensive in cost, they can transfer information at extremely fast speeds in high-traffic environments. There are two types of fiber optic cables that you need to be aware of. One of them is single-mode. Single-mode fiber allows for transmission of data over long distances by using a single ray of light. Multi-mode fiber carries data over shorter distances by using several rays of light at the same time.

Universal Serial Bus (USB) Cables

Although these types of cables are typically used to connect external devices to the computer for personal use, there are special adapters that will allow an Ethernet cable to indirectly connect to a USB port and function normally. These tend to be used as temporary setups in network cabling until a more reliable type of cabling, such as STP/UTPs or fiber optics, can be properly installed. As you can see, there is little variety in the different types of network cables that are commonly used. The current trend is trying to re-design these cables to squeeze as much performance and speed out of them as possible. Efforts are being made to kill the world of cables and enter a completely wireless world, but it is difficult to say when this time will come.  

What is Network Cabling?

It is using network cables to connect and transfer information and data between storage area networks, switches, routers, and computers. The data flows through the network cables.

• It is simple to set up and understand network cabling.
• It is also easy to identify the source of problems and fix them in structured cabling.
• Network cabling is not only flexible. It also supplies much more bandwidth.
• Business owners can use network cabling to keep their businesses neat and tidy.

Related Post: 5 Advantages of Smart Wiring

Four Types of Networking Cables:

1. Coaxial Cable.

This system is rarely used. Installing a coaxial cable is complex. The cable can resist signal obstruction. A plastic layer insulates the centre conductor and the braided metal.

2. Shielded Twisted Pair (STP) Cable

It is mostly used in business installations. It is suitable for areas with risk to the electrical current and potential interference. Its external shield works as a ground. You can use the shielded twisted pair cable to expand the distance between cables.

3. Fibre Optic Cable

It consists of several layers of protective materials that surround a centre glass core. Fibre optic cable does not transmit electronic signals. Instead, it transmits light, removing the electrical obstruction problem. It is suitable for areas with electrical interference. You can use it to connect networks between buildings.

4. Unshielded Twisted Pair Cable

It is mostly used for computer networking and conventional telephone. It does not have internal shielding. It is suitable for workgroups because of its good performance and flexibility. It has an outer insulating jacket that protects the cable from damage or physical stress.

It is important to understand how the different types of networking cabling affect the other aspects of a network.

Do you want to install a data cable in Perth home or commercial space? Powerlec offers any type of data cabling in Perth. Contact us today on 08 9750 5203.

What are the two types of network cable?

What are the 2 types of cables connect network equipment?

What are the types of cables used in networking explain each?