Editor-in-Chief William F. Ritter, University of Delaware, USA
Editorial Contact Kumaran Rengaswamy Assistant Managing Editor, Compuscript AssistantManagingEditor@degruyter.com
Managing Editor Natalia Mikołajczak natalia.mikolajczak@degruyter.com
Editorial Advisory Board Francesco Asdrubali, Univerfity of Roma, Italy Alessandro Baratta, Univerfity of Naples, Italy Raffaele Barretta, University of Naples, Italy Dumitru Bǎleanu, Cankaya University, Turkey Chris Bingham, University of Lincoln, UK Shyi-Ming Chen, National Taiwan University of Science and Technology, Taiwan Chen-Yuan Chen, Swinburne University of Technology, Melbourne, Australia Francesco Calise, Univerfity of Naples, Italy Ottavia Corbi, Univerfity of Naples, Italy Silvio Silverio da Silva, University of Sao Paulo, Brazil Ayhan Demirbas, Sirnak University, Sirnak, Turkey Valeria di Sarli, Consiglio Nazionale delle Ricerche, Rome, Italy Milan Dimitrijevic, Astronomical Observatory Belgrade, Belgrade, Serbia Earl Dowell, Duke University, USA Jun-Sheng Duan, Shanghai Institute of Technology, China Mostafa Eslami, Department of Mathematics, University of Mazandaran, Babolsar, Iran José M.F. Ferreira, University of Aveiro, Portugal Ivan Giorgio, Università di Roma La Sapienza, Italy Alexander Guz, National Academy of Sciences of Ukraine, Ukraine Tasawar Hayat, Quaid-i-Azam University, Pakistan Hanafi Ismail, University of Sains Malaysia Thiagalingam Kirubarajan, McMaster University, Canada Yuri Kivshar, Australian National University, Canberra, Australia Miroslav Krstic, University of California, San Diego, USA James Lam, University of Hong Kong, China Heng Li, Hong Kong Polytechnic University, China Dimitri Mavris, Georgia Institute of Technology, Atlanta, USA Antonio Mendes Lopes, Institute of Science and Innovation in Mechanical and Industrial, Porto, Portugal Saleh Mobayen, University of Zanjan, Iran Dino Musamarra, University of Studi della Campania Luigi Vanvitelli, Naples, Italy Tatsuki Ohji, National Institute of Advanced Industrial Science and Technology [AIST], Japan José C. Páscoa, University of Beira Interior, Portugal Przemysław Perlikowski, Technical University of Lodz, Poland Phuc Phung-Van, Ghent University, Belgium Donal O'Regan, National University of Ireland, Galway, Ireland Luca Salvati, Council for Agricultural Research and Economics, Arezzo, Italy Peng Shi, Victoria University, Australia Vijay P. Singh, Texas A and M University, USA Mustafa Soylak, Erciyes University, Turkey Jan Torgersen, Norwegian University of Science and Technology, Norway Francesco Tornabene, University of Bologna, Italy Abdelouahed Tounsi, Université de Sidi Bel Abbes, Algeria Jay F. Tu, North Carolina State University, USA Mustafa Turkyilmazoglu, Hacettepe University, Turkey Firdaus Udwadia, University of Southern California, USA Abdul-Majid Wazwaz, Saint Xavier University, USA Thomas J. Webster, Brown University, USA Marian Wiercigroch, University of Aberdeen, Aberdeen, UK S.C. Wong, Univeristy of Hong Kong, China Jia Jane You, Hong Kong Polytechnic University, China Jie Zhang, Newcastle University, United Kingdom Yong Zhang, National University of Singapore, Singapore Argyrios Zolotas, University of Lincoln, UK
Editors Applied Mathematics in Engineering Praveen Agarwal, Anand International College of Engineering, India Anjan Biswas, Department of Physics, Chemistry and Mathematics, Alabama A&M University Normal, USA George A. Gravvanis, Department of Electrical and Computer Engineering, Democritus University of Thrace, Greece Jonatan Lenells, KTH Royal Institute of Technology, Sweden Mikhail Posypkin, Federal Research Center “Computer Science and Control” of Russian Academy of Sciences, Russia Michael Ruzhansky, Imperial College London, UK Ivanka M. Stamova, The University of Texas at San Antonio, USA Yuan-Nan Young, New Jersey Institute of Technology, USA
Artificial Intelligence Valentina E. Balas, Department of Automation and Applied Informatics, Aurel Vlaicu University of Arad, Romania Jason J. Jung, Chung-Ang University, Republic of Korea Shuai Li, Department of Engineering, University of Cambridge, United Kingdom
Hardware & Architecture Julius Žilinskas, Institute of Mathematics and Informatics, Vilnius University, Lithuania
Software Engineering Jason J. Jung, Chung-Ang University, Republic of Korea
Computer Systems Organization & Communication Networks Leyre Azpilicueta, Tecnologico de Monterrey, Mexico Jordi Mognay Batalla, Warsaw University of Technology/ National Institute of Telecommunications, Poland Christian Callegari, Department of Information Engineering, University of Pisa, Italy Francisco Falcone, Universidad Publica de Navarra, Spain Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland
Signal, Image and Speech Processing Radoslaw Wrobel, Department of Mechanical Engineering, Wroclaw University of Technology, Poland
Computer Applications Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland
Data Structures, Cryptology & Information Theory Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland
Automation & Control Systems Valentina E. Balas, Department of Automation and Applied Informatics, Aurel Vlaicu University of Arad, Romania Hamid Reza Karimi, Department of Engineering, University of Agder, Norway Andrea Paoli, School of Enineering, University of Lincoln, UK
Cybernetics Joakim Holmberg, Division of Mechanics, Linköping University, Sweden
Information System & Telecommunication Leyre Azpilicueta, Tecnologico de Monterrey, Mexico Jordi Mognay Batalla, Warsaw University of Technology/ National Institute of Telecommunications, Poland Peter Brida, University of Zilina, FEE, Department of Telecommunications and Multimedia, Slovakia Christian Callegari, Department of Information Engineering, University of Pisa Francisco Falcone, Universidad Publica de Navarra, Spain Wojciech Mazurczyk, Warsaw University of Technology, Faculty of Electronics and Information Technology Institute of Telecommunications, Poland
Remote Sensing Bor-Chen Kuo, Graduate Institute of Educational Measurement and Statistics, National Taichung University of Education, Taiwan Radoslaw Wrobel, Department of Mechanical Engineering, Wroclaw University of Technology, Poland
Electromagnetics Tomasz Długosz, Wroclaw University of Technology, Institute of Telecommunications, Teleinformatics and Acoustics, Poland Francisco Falcone, Universidad Publica de Navarra, Spain Vassilios Tsiantos, Department of Electrical Engineering, Eastern Macedonia and Thrace Institute of Technology, Greece
Power Systems, Power Engineering Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece
Power Electronics, Electrical Machines, Drives & Networks Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece Ibrahim Al-Bahadly, School of Engineering and Advanced Technology, Massey University, Palmerston North, New Zealand
Electrical Machines and Drives Arash Hassanpour Isfahani, Renewable Energy and Vehicular Technology Laboratory, University of Texas at Dallas, Richardson, USA
Electronics and Microelectronics, Instrumentation Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania Radoslaw Wrobel, Department of Mechanical Engineering, Wroclaw University of Technology, Poland
Electronic Materials and Devices Miron – Jean Cristea, Department of Electronic Devices and Circuts, Politehnika University of Bucharest, Romania Rahul Trivedi, GLOBALFOUNDRIES, USA
Nanotechnology & Microengineering Florin Babarada, University Politehnica of Bucharest, Faculty of Electronics Telecommunications & Information Technology, Romania Zoltán Fekete, Hungarian Academy of Sciences, Hungary Cheuk-Wai Tai, Department of aterials and Environmental Chemistry, Stockholm University, Sweden Rahul Trivedi, GLOBALFOUNDRIES, USA
Control, Robotics, Mechatronics Hamid Reza Karimi, Department of Engineering, University of Agder, Norway Andrea Paoli, School of Engineering, University of Lincoln, UK Mikhail Posypkin, Federal Research Center “Computer Science and Control” of Russian Academy of Sciences, Russia Xiu-Tian Yan, Department of Design, Manufacture and Engineering Management, University of Strathclyde, UK
HVAC Systems Constantinos Balaras, Research Director Group Energy Conservation [GREC], Institute for Environmental Research & Sustainable Development [IERSD]; National Observatory of Athens [NOA], Greece Tomasz Cholewa, Lublin University of Technology, Faculty of Environmental Engineering, Poland Harjit Singh, School of Engineering and Design, Brunel University, UK
Construction & Building Technology Carlos Chastre, Universidade NOVA de Lisboa, Portugal Humberto Varum, Faculty of Engineering of the University of Porto, Porto, Portugal Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria Velu Saraswathy, Central Electrochemical Research Institute, India Alexandros-Dimitrios G. Tsonos, Department of Civil Engineering, School of Engineering, Aristotle University of Thessaloniki, Greece
Geomatics, Geosensorics, Geodetic Engineering Amin Barari, Department of Civil and Environmental Engineering Virginia Tech, US
Offshore Engineering R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science [IKM], Faculty of Science & Technology, University of Stavanger, Norway Amin Barari, Department of Civil and Environmental Engineering Virginia Tech, US
Energy & Environment Constantinos Balaras, Research Director Group Energy Conservation [GREC], Institute for Environmental Research & Sustainable Development [IERSD]; National Observatory of Athens [NOA], Greece Christian Ghiaus, INSA Lyon, France Javier Quagliano, Argentine R&D Institute for the Defense [CITEDEF], Argentina Peter Kenneth John Robertson, Queens University Belfast, UK Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia George Xydis, Aarhus University, Denmark
Environmental Engineering Tomasz Cholewa, Lublin University of Technology, Faculty of Environmental Engineering, Poland Constantinos Balaras, Research Director Group Energy Conservation [GREC], Institute for Environmental Research & Sustainable Development [IERSD]; National Observatory of Athens [NOA], Greece Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institte of Technology, USA Peter Kenneth John Robertson, Queens University Belfast, UK Nadhir Al-Ansari, Civil, Environmental and Natural Resources Engineering, Lulea University, Sweden George Xydis, Centre for Research & Technology, Greece
Energy & Buildings Tomasz Cholewa, Lublin University of Technology, Faculty of Environmental Engineering, Poland Joao C.G. Lanzinha, Department of Civil Engineering and Architecture, University of Beira Interior, Portugal Harjit Singh, School of Engineering and Design, Brunel University, UK Constantinos Balaras, Research Director Group Energy Conservation [GREC], Institute for Environmental Research & Sustainable Development [IERSD]; National Observatory of Athens [NOA], Greece Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia Christian Ghiaus, INSA Lyon, France George Xydis, Centre for Research & Technology, Greece
Chemical & Petroleum Engineering George Z. Kyzas, Department of Petroleum and Natural Gas Technology, Technological Educational Institute of Kavala, Greece Peter Kenneth John Robertson, Queens University Belfast, UK
Hydraulic Engineering Nadhir Al-Ansari, Civil, Environmental and Natural Resources Engineering, Lulea University, Sweden
Manufacturing Engineering Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania Luis Norberto Lopez de Lacalle, UPV/EHU-University of the Basque Country, Spain
Natural, Man-made Disasters & Their Management Ioannis D. Doukas, Civil Engineering, Aristotle University of Thessaloniki, Greece Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA
Sustainable Development Constantinos Balaras, Research Director Group Energy Conservation [GREC], Institute for Environmental Research & Sustainable Development [IERSD]; National Observatory of Athens [NOA], Greece Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science [IKM], Faculty of Science & Technology, University of Stavanger, Norway Domagoj Vulin, Faculty of Mining, Geology and Petroleum Engineering, University of Zagreb, Croatia
Transportation Science & Technology Silvino Dias Capitao, Department of Civil Engineering, Polytechnic Institute of Coimbra, Portugal Krasimir T. Krastanov, Material Handling and Construction Machines and Systems Department, Todor Kableshkov University of Transport,Bulgaria Wai Yuen Szeto, Department of Civil Engineering, University of Hong Kong, Hong Kong
Waste Management & Waste Technology Ruben Miranda Carreno, Chemical Engineering, Complutense University of Madrid, Spain Rafael Santos, School of Engineering, University of Guelph, Canada Domagoj Vulin, Faculty of Mining, Geology and Petroleum Engineering, University of Zagreb, Croatia
Aerospace Engineering Yevgen Gorash, Department of Mechanical & Aerospace Engineering, University of Strathclyde, UK José C. Páscoa, Head Lic. Electromechanical Engineering Laison Office at Nuclear Agency – OCDE, Univeristy of Beira Interior, CAST – Center for Aerospace Science and Technology, Portugal Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Astrodynamics Anna Guerman, CAST – Centre for Aerospace Science and Technologies, University of Beira Interior, Portugal
Bioengineering and Biomechanics Hamed Hatami-Marbini, Department of Mechanical & Industrial Engineering, University of Illinois at Chicago, USA Joakim Holmberg, Division of Mechanics, Linköping University, Sweden
Energy & Fuels Christian Ghiaus, INSA Lyon, France Anna Kowalska-Pyzalska, Wroclaw University of Technology, Poland Amin Paykani, ETH-Zurich, Switzerland
Renewable & Green Energy Veera Gnaneswar Gude, Department of Civil Engineering, Oregon Institute of Technology, USA Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur Harjit Singh, School of Engineering and Design, Brunel University, UK Zeljko Tomsic, University of Zagreb, Faculty of Electrical Engineering and Computing, Department of Power Systems, Republic of Croatia Athanasios Karlis, Electrical & Computer Engineering, Democritus University of Thrace, Greece George Xydis, Centre for Research & Technology, Greece
Nuclear Engineering Mohamed Eid, DM2S/SERMA, CAE/DEN, France Jun Wang, University of Wisconsin - Madison, USA
Mechanical Engineering Evangelos G. Giakoumis, School of Mechanical Engineering, National Technical University of Athens, Greece Yevgen Gorash, Department of Mechanical & Aerospace Engineering, University of Strathclyde, UK José C. Páscoa, Head Lic. Electromechanical Engineering Laison Office at Nuclear Agency – OCDE, Univeristy of Beira Interior, CAST – Center for Aerospace Science and Technology, Portugal Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK
Engineering Thermodynamics, Heat & Mass Transfer Chien-Pin Chen, Chemical and Materials Engineering, University of Alabama, USA Chang Yi Kong, Department of Materials Science and Chemical Engineering, Faculty of Engineering, Shizuoka University, Japan Domagoj Vulin, Faculty of Mining, Geology and Petroleum Engineering, University of Zagreb, Croatia Gongnan Xie, Department of Mechanical and Power Engineering, Northwestern Polytechnical University, China George Xydis, Centre for Research & Technology, Greece
Engineering Design Filippo A. Salustri, Department of Mechanical and Industrial Engineering, Ryerson University, Canada George Xydis, Centre for Research & Technology, Greece
Automotive Engineering Simon M. Barrans, Department of Engineering and Technology, University of Huddersfield, UK James Njuguna, Robert Gordon University, UK Amin Paykani, ETH-Zurich, Switzerland Bogdan Varga, Technical University of Cluj-Napoca, Faculty of Mechanics, Romania
Industrial Engineering Fratila Dominita-Florina, Technical University of Cluj-Napoca, Department of Manufacturing Engineering, Romania Waldemar Karwowski, Department of Industrial Engineering and Management Systems, University of Central Florida, USA Giulio Lorenzini, Department of Industrial Engineering, University of Parma, Italy R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science [IKM], Faculty of Science & Technology, University of Stavanger, Norway
Continuum Mechanics & Mechanics of Materials Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada Joakim Holmberg, Division of Mechanics, Linköping University, Sweden Jose Merodio, Department of Continuum Mechanics and Theory of Structures, Technical University of Madrid, Spain
Engineering Fluid Dynamics Chien-Pin Chen, Chemical and Materials Engineering, University of Alabama, USA Grzegorz Liśkiewicz, Institute of Turbomachinery, Technical Univerisity of Łódź, Poland Farhad Ein-Mozaffari, Chemical Engineering, Ryerson University, Canada Antonio Miguel, Department of Physics, University of Evora, Portugal George Xydis, Centre for Research & Technology, Greece
Vibration, Dynamical Systems, Control Hua-Peng Chen, Department of Engineering Science, Greenwich University, UK Jinchen Ji, School of Electrical, Mechanical and Mechatronic Systems, Faculty of Engineering and IT, University of Technology, Sydney, Australia Radoslaw Wrobel, Department of Mechanical Engineering, Wroclaw University of Technology, Poland
Theoretical and Applied Mechanics Hamid Akbarzadeh, Mechanical Engineering Department, University of New Brunswick, Fredericton, NB, Canada
Biomaterials Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungary Nrayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA
Ceramics, Glass, Natural Materials Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungary Narayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong Rahul Trivedi, GLOBALFOUNDRIES, USA
Coatings and Films, Corrosion, Tribology Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria Velu Saraswathy, Central Electrochemical Research Institute, India Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences, Bulgaria Rahul Trivedi, GLOBALFOUNDRIES, USA
Composite Materials Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungary Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria James Njuguna, Robert Gordon University, UK Javier Quagliano, Argentine R&D Institute for the Defense [CITEDEF], Argentina Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences Alexandros-Dimitrios G. Tsonos, Department of Civil Engineering, School of Engineering, Aristotle University of Thessaloniki, Greece
Material Characterization & Testing Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada Homayoun Hadavinia, School of Mechanical & Automotive Engineering, Kingston University London, UK Jacek Mucha, Rzeszow University of Technology, Poland James Njuguna, Robert Gordon University, UK Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur Radostina Konstantinova Stoyanova, Institute of General and Inorganic Chemistry, Bulgarian Academy of Sciences Rahul Trivedi, GLOBALFOUNDRIES, USA
Materials & Manufacturing Technology Zengtao Chen, Department of Mechanical Engineering, University of New Brunswick, Canada Jan Jezierski, Department of Foundry, Silesian University of Technology, Gliwice, Poland James Njuguna, Robert Goron University, UK R.M. Chandima Ratnayake, Department of Mechanical and Structural Engineering and Materials Science [IKM], Faculty of Science & Technology, University of Stavanger, Norway Rahul Trivedi, GLOBALFOUNDRIES, USA
Mining & Mineral Processing Dariusz Oleszak, Faculty of Material Science and Engineering, Warsaw University of Technology, Poland
Metallurgy & Metallurgical Engineering Robert Bidulsky, Faculty of Metallurgy, Technical University of Kosice, Slovakia Jan Jezierski, Department of Foundry, Silesian University of Technology, Gliwice, Poland
Nanoscience & Nanotechnology Csaba Balázsi, Head of the Ceramics and Nancomposites Department, Institute of Mechanical Engineering, University of Pannonia, Hungary Robert Bidulsky, Faculty of Metallurgy, Technical University of Kosice, Slovakia Zoltán Fekete, Hungarian Academy of Sciences, Hungary Haitao Huang, Department of Applied Physics, Hong Kong Polytechnic University, Hong Kong Cheuk-Wai Tai, Department of Materials and Environmental Chemistry, Stockholm University, Sweden Orlin Iliev Angelov, Central laboratory of solar energy and new energy sources - Bulgarian Academy of Sciences, Bulgaria Barbara Codan, Industrial and Information Engineering, University of Trieste, Italy Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur Rahul Trivedi, GLOBALFOUNDRIES, USA
Paper & Wood Ruben Miranda Carreno, Chemical Engineering, Complutense University of Madrid
Polymer Science Margarita M. Natova, Institute of Mechanics of Bulgarian Academy of Sciences, Bulgaria Zhang Qichun, School of Materials Science and Engineering, Nanyang Technological University, Singapur Javier Quagliano, Argentine R&D Institute for the Defense [CITEDEF], Argentina
Textiles Radostina A. Angelova, Technical University of Sofia, Department of Textiles, Centre for Research and Design in Human Comfort, Energy and Environment [CERDECEN], Bulgaria Narayan Bhattarai, Department of Chemical and Bioengineering, North Carolina A&T State University, USA
Assistant Editors Famous O. Igbinovia, Czech Technical University, Czech Republic Michał Lipian, Lodz University of Technology, Poland Muhammad Atif Makhdoom, Friedrich-Alexander University Erlangen-Nürnberg, Germany Sparsha Nagula, Hamburg University of Technology, Germany Sebastian Romero García, RWTH Aachen University, Institute of Integrated Photonics, Germany Łukasz Sadowski, Wroclaw University of Science and Technology, Poland Dariusz Ulbrich, Poznan University of Technology, Poland Yuan Wang, University of Melbourne, Australia Juan Luis Yarmuch, University of Melbourne, Australia
Language Editors Amaechi Chiemela Victor, Lancaster University, UK Tomasz Dudziak,Foundry Research Institute [FRI], Poland Emmanuel Gonzalez Escobar, University of Sheffield, UK Ganesharajah Ganadhiepan, University of Melbourne, Australia Julio Gonzalez-Saenz, University of Portsmouth, UK Helena Johnston, University of Leeds, UK Cheng Li, University of Kent, United Kingdom Weena Lokuge, University of Southern Queensland, Australia Sarah McCormack, Department of Civil, Structural and Environmental Engineering, Trinity College Dublin, Ireland Michael Mesaritis, University of Cyprus, Cyprus Chikezie Nwaoha, University of Regina, Regina, SK, Canada Victoria Oguntosin, University of Reading, Biomedical Engineering, UK Jayashri Ravishankar, University of New South Wales, Australia Steve Richards, Southampton Solent University, UK Rafael M. Santos, School of Engineering, University of Guelph, Canada Sheikh Khaleduzzaman Shah, University of Melbourne, Australia Shivangi Sharma, University of Exeter, UK Sophocles Sophocleous, University of Exeter, UK
Publisher DE GRUYTER Poland Bogumiła Zuga 32A Str. 01-811 Warsaw, Poland T: +48 22 701 50 15
Which engineering is best in Germany?
Some of the top engineering programs in Germany include the following:.
Mechanical Engineering..
Civil Engineering..
Electrical Engineering..
Chemical Engineering..
Biomedical Engineering..
Industrial Engineering..
Aerospace Engineering..
Automotive Engineering..
Which is the international journal publication for engineering?
International Research Journal of Engineering and Technology [IRJET] is an peer reviewed, open access, high Impact Factor,Multidisciplinary journal in English for the enhancement of research in various discipline of Engineering, Science and Technology.
How do I get engineering colleges in Germany?
Requirements for an Engineering Degree.
A First Academic Degree in a relevant subject. Depending on the study program you are applying to, you will have different requirements for your previous education. ... .
A Language Certificate. Students have the option to study in English or in German. ... .
A Visa or Residence Permit..
What are the engineering courses in Germany?
The four main areas of engineering are mechanical engineering/process engineering, electrical engineering, civil engineering and architecture. More than 3,600 engineering degree courses are offered in Germany, including around 1,600 Master's courses .