vive U2 guitar system features digital wireless technology that delivers incredible audio quality, simple setup, and is extremely reliable for any gigging musicians. It delivers a full 20Hz-20 kHz frequency response, so you’ll hear your guitar tone in great detail with only 6ms of latency. This wireless system operates at 2.4GHz ISM band for crystal clear broadcasting ensuring the integrity of your signal on stage and covers 70 feet of range without any signal dropout. The Li-ion batteries help makes the U2 wireless system environmentally friendly that can last up to 5 hours per charge. The chassis is made out of a durable ABS plastic that can withstand the rigors of touring and the harshest of climates. This wireless is a perfect fit for any pedal board thanks to its simplistic, and compact design. So, go wireless with the Xvive U2 system. It’ll declutter the stage and offers freedom in motion.
There is some confusion in the market about running this system with an Active Bass. The system will run 99% of active basses no problem at all, XVive state that the system cant take an active OUTPUT of anything over 5.6 volts, some consumers are confusing their basses OUTPUT with their preamps 9volt power supply. There are very few basses that we know of that would come anywhere near a 5.4 volt output. Your standard Active bass running a 9 volt active preamp system will have an actual OUTPUT voltage of around 3 volts. Even most 18 volt active system will rarely exceed a 4-5 volt output, there will be some exception but we havent found many......except for U-basses, They do not work with U-basses. We have tested multiple Active basses with this XViVE U2 system and have come across zero problems, the system has delivered a super clean signal every time.
- Transmitter plugs into the Guitar [you instruments], the receiver plugs into the effects pedal, AMP, Audio, etc. 2. Turn on the Transmitter and the receiver and check the LED blue lights flashing times and make sure the blue led lights have same flashing times which means transmitter and receiver are in both same channels. 3.After connecting successfully, LED lights on receiver will keep light on.4.Now, let’s rock together.
Range: ≥70 feet Line-0-site outdoors Latency: