Mô tả

Tổng quan về Huawei NEDS00V3R100 NE08E Series Routers Software

NEDS00V3R100 – NE08E Series Routers Software. NE08E-S6E V300R001 Enterprise Software package.

Thông số kỹ thuật Huawei NEDS00V3R100 NE08E Series Routers Software

Description NE08E-S6E V300R001 Enterprise Software package Software and Hardware Attributes Self-developed software Product Line Enterprise Networking Product Family Router & Carrier Ethernet Sub Product Family Universal Service Router Product Series NE08E UOM PCS

_____Uy tín – Chất lượng_____

CÔNG TY TNHH THƯƠNG MẠI DỊCH VỤ NÉT VIỆT PRO

Địa chỉ: : 447/23 Bình Trị Đông, khu phố 5, phường Bình Trị Đông A, quận Bình Tân, Tp. Hồ Chí Minh

MST: 0314542250

Tel: [028] 22 535 496

Kinh doanh – Hotline: 0902.966.449 – 0962.241.608

Mail: [email protected] – [email protected]

Skype: netvietpro.com

Website : www.netvietpro.com – www.ciscoshop.vn – www.phukienquang.com.vn

AR1200(Data Communication&

x7c;Campus Network&

x7c;Access Router&

x7c;AR1200 Series&

x7c;AR1200) Document List

AR1220E front view

AR1200 Series Routers

AR1200 series enterprise routers have multi-core CPUs and a non-blocking switching architecture and integrate multiple functions such as Wi-Fi and voice to provide customers with flexible all-in-one networking services.

Temporary Software Authorization Application

Note: This is an automatic approval process. After the application is approved, the users have the permission to download the software package of the corresponding product version within seven days.

• 1. EoC Services for Huawei OLTs? Ethernet over coaxial cable (EoC) is a key technology for the next-generation broadcast and TV networks. This technology can be used to reconstruct the existing cable networks to bidirectional broadband network to provide bandwidth services such as high-speed Internet (HSI) and Internet protocol television (IPTV). This topic uses the MA5631 as an optical network unit (ONU) to describe how to configure EoC broadband services. Service Requirements Users can subscribe to broadcast and TV services, Internet access services, and interaction services. Broadcast and TV services can be provided after the ONU hardware is connected and the service channel is set up. No configuration is required. This topic only describes how to configure the Internet access and interaction services. The CNU uses the HG7022, providing two LAN ports. Port 1 is connected to a PC for providing the Internet access service and port 2 is connected to a set top box (STB) for providing a return channel for the interactive TV service. The CNU differentiates services by port. Virtual local area networks (VLANs) are not switched on the optical line terminal (OLT) and services are transparently transmitted on the OLT.  Users access the Internet in Point-to-Point Protocol over Ethernet (PPPoE) dialup mode.  Policy Information Transfer Protocol (PITP) is enabled to protect user accounts against theft and roaming. NOTE: In Dynamic Host Configuration Protocol (DHCP) dialup mode, you can configure anti-theft and roaming for user accounts. Networking The below figure shows a network diagram of the EoC broadband service. Network diagram of the EoC broadband service 1
• 2. below table provides the data plan for the OLT, and another table provides the data plan for the ONU. Table Data plan for configuring the EoC broadband service-OLT side Item Data VLAN Inband management VLAN: smart VLAN 8 SVLAN: smart VLAN 100 with the attribute Common SVLAN: smart VLAN 101 with the attribute Common IP address Inband management IP address: 192.168.50.1/24 GPON service board Port ID: 0/3/1 ONU ID: 1 ONU authentication mode: SN ONU SN: 48575443E6D8B541 DBA profile Profile name: PrivateLine Type: type3 Assured bandwidth: 20 Mbit/s Maximum bandwidth: 50 Mbit/s ONU line profile Profile ID: 10, bound to the DBA profile named PrivateLine GEM port IDs: 0, 1, and 2 T-CONT ID: 5 ONU management mode SNMP Table Data plan for configuring the EoC broadband service-ONU side Item Data CNU CNU ID: 0 CNU MAC address: 00B0-5240-0003 CNU SN: hwhw-12341234 CNU line profile: 1 VLAN Inband management VLAN: smart VLAN 8, adding GPON upstream port 0/0/0 to this VLAN 2
• 3. VLAN 100 with the attribute Stacking, adding GPON upstream port 0/0/0 to the VLAN Interactive TV SVLAN: smart VLAN 101 with the attribute Common, adding GPON upstream port 0/0/0 to the VLAN IP address Inband management IP address: 192.168.50.2/24 Procedure Configure the OLT. 1. Create an SVLAN and add an upstream port to it. Create smart VLANs 100 and 101, their attributes are common, and add upstream port 0/19/0 to the VLANs. huawei(config)

  vlan 100-101 smart huawei(config)

  vlan attrib 100 common huawei(config)

  vlan attrib 101 common huawei(config)

  port vlan 100-101 0/19 0 2. (Optional) Configure upstream link aggregation. In this example, a single upstream port is used. In the case of multiple upstream ports, configure upstream link aggregation. For details, see "Configuring the Link Aggregation of Upstream Ethernet Port". 3. Configure GPON ONU profiles. GPON ONU profiles include the DBA profile, line profile, service profile, and alarm profile.  DBA profile: A DBA profile describes the GPON traffic parameters. A T-CONT is bound to a DBA profile for dynamic bandwidth allocation, improving the upstream bandwidth usage.  Line profile: A line profile describes the binding between the T-CONT and the DBA profile, the QoS mode of the traffic stream, and the mapping between the GEM port and the ONU-side service.  Service profile: A service profile provides the service configuration channel for the ONU that is managed using optical network terminal management and control interface (OMCI).  Alarm profile: An alarm profile contains a series of alarm thresholds to measure and monitor the performance of activated ONU lines. When a statistical value reaches the threshold, the host is notified and an alarm is reported to the log host and the NMS. 4. Add a DBA profile. Run the display dba-profile command to query the DBA profiles in the system. If the DBA profiles in the system do not meet requirements, run the dba-profile 3

• 4. add a DBA profile. Configure the profile name to PrivateLine, profile type to Type3, assured bandwidth to 20 Mbit/s, and maximum bandwidth to 50 Mbit/s. huawei(config)

  dba-profile add profile-name PrivateLine type3 assure 20480 max 51200 5. Add an ONU line profile. Add GPON ONU line profile 10 and bind T-CONT 5 to the DBA profile named PrivateLine. In this way, the T-CONT can provide flexible DBA solutions based on different configurations in the DBA profile. huawei(config)

  ont-lineprofile gpon profile-id 10 huawei(config-gpon-lineprofile-10)

  tcont 5 dba-profile-name PrivateLine Add GEM port 0 for transmitting management traffic streams, GEM port 1 for transmitting HSI traffic streams and GEM port 2 for transmitting interactive TV traffic streams. Bind GEM port 0, GEM port 1 and GEM port 2 to T-CONT 5. Configure the QoS mode to priority-queue (default) and the queue priority to 3. NOTE:  To change the QoS mode, run the qos-mode command to configure the QoS mode to gem-car or flow-car, and run the gem add command to configure the ID of the traffic profile bound to the GEM port.  When the QoS mode is PQ, the default queue priority is 0; when the QoS is flow-car, traffic profile 6 is bound to the port by default (no rate limitation); when the QoS mode is gem-car, traffic profile 6 is bound to the port by default (no rate limitation). huawei(config-gpon-lineprofile-10)

  gem add 0 eth tcont 5 priority-queue 3 huawei(config-gpon-lineprofile-10)

  gem add 1 eth tcont 5 priority-queue 3 huawei(config-gpon-lineprofile-10)

  gem add 2 eth tcont 5 priority-queue 3 Configure the mapping mode from the GEM port to ONU-side service to VLAN (default), map the service port of management VLAN 8 to GEM port 0, map the service port of HSI SVLAN 100 to GEM port 1 and map the service port of the interactive TV SVLAN 101 to GEM port 2. huawei(config-gpon-lineprofile-10)

  mapping-mode vlan huawei(config-gpon-lineprofile-10)

  gem mapping 0 0 vlan 8 huawei(config-gpon-lineprofile-10)

  gem mapping 1 1 vlan 100 huawei(config-gpon-lineprofile-10)

  gem mapping 2 2 vlan 101 After the configuration is complete, run the commit command to make the configured parameters take effect. huawei(config-gpon-lineprofile-10)

  commit huawei(config-gpon-lineprofile-10)

  quit 4

• 5. an alarm profile.  The ID of the default GPON alarm profile is 1. The thresholds for all the alarm parameters in the default alarm profile are 0, which indicates that no alarm is generated.  In this example, the default alarm profile is used, and therefore the configuration of the alarm profile is not required.  Run the gpon alarm-profile add command to add an alarm profile, which is used for monitoring the performance of an activated ONU line. 7. Add an ONU on the OLT. The ONU is connected to the GPON port of the OLT using an optical fiber. You can perform the service configuration only after adding an ONU successfully on the OLT. Add an ONU. Connect the ONU to GPON port 0/3/1. The ONU ID is 1, the serial number (SN) is 48575443E6D8B541, the management mode is SNMP, and the bound line profile ID is 10. Add an ONU in either of the following two methods based on site requirements:  Add an ONU offline: If the password or SN of an ONU is obtained, you can run the ont add command to add the ONU offline.  Find an ONU automatically: If the password or SN of an ONU is unknown, run the port ont-auto-find command in GPON mode to enable the ONU auto-find function of the GPON port. Then run the ont confirm command to confirm the ONU. To add an ONU offline, do as follows: huawei(config)

  interface gpon 0/3 huawei(config-if-gpon-0/3)

  ont add 1 1 sn-auth 48575443E6D8B541 snmp ont-lineprofile- id 10 desc MA5631_0/3/1/1_lineprofile10 To automatically find an ONU, do as follows: huawei(config)

  interface gpon 0/3 huawei(config-if-gpon-0/3)

  port 1 ont-auto-find enable huawei(config-if-gpon-0/3)

  display ont autofind 1 //After this command is executed, the information about all the ONUs connected to //the GPON port using the optical splitter is displayed. -------- Number : 1 F/S/P : 0/3/1 Ont SN : 48575443E6D8B541 Password : VenderID : HWTC Ont Version : MA5631 5

• 6. V800R310C00 Ont EquipmentID : SmartAX MA5631 Ont autofind time : 2011-09-10 11:20:16 -------- huawei(config-if-gpon-0/3)

  ont confirm 1 ontid 1 sn-auth 48575443E6D8B541 snmp ont-lineprofile-id 10 desc MA5631_0/3/1/1_lineprofile10 NOTE: If multiple ONUs of the same type are connected to a port and the same line profiles or service profiles are bound to the ONUs, add these ONUs in batches by confirming the auto-found ONUs in batches. The adding simplifies the operation and increases the configuration efficiency. Therefore, the preceding command can be modified to: huawei(config-if-gpon-0/3)

  ont confirm 1 all sn-auth snmp ont-lineprofile-id 10 desc MA5631_0/3/1_lineprofile10. 8. Confirm that the ONU goes online properly. After an ONU is added, run the display ont info command to query the ONU status. Ensure that Control flag of the ONU is active, Run State is online, and Config state is normal. huawei(config-if-gpon-0/3)

  display ont info 1 1 --------- F/S/P : 0/3/1 ONT-ID : 1 Control flag : active //Indicates that the ONU is activated. Run state : online //Indicates that the ONU already goes online properly. Config state : normal //Indicates that the configuration status of the ONU is normal. ...//The rest of the response information is omitted. huawei(config-if-gpon-0/3)

  quit If the ONU configuration fails or the ONU fails to be up, check the ONU state by referring to the above-mentioned descriptions.  If Control flag is deactive, run the ont activate command in GPON port mode to activate the ONU.  If Run state is offline, the ONU fails to be up. The physical line may be broken or the optical module may be damaged. Check both the materials and line.  If Config state is failed, the ONU configuration fails. The ONU capability set outmatches the actual ONU capabilities. Run the display ont failed-configuration command in diagnosis mode to check the failed configuration item and the failure cause. Then rectify the fault according to actual conditions. NOTE: If an ONT supports only four queues, the values of 4–7 of the priority-queue parameter in the gem add command are invalid. After configuration recovers, Config 6

• 7. failed. 9. Configure the management channel from the OLT to the ONU. NOTE: The management channel needs to be configured only when the OLT remotely manages the ONU using the SNMP protocol. When the OLT remotely manages the ONU using the OMCI, the management channel need not be configured.  Configure the inband management VLAN and IP address of the OLT. To remote log in to the ONU and configure the ONU from the OLT, configure the inband management VLANs and IP addresses of the OLT and the ONU on the OLT. Create management VLAN 8 and set the inband management IP address to 192.168.50.1/24. huawei(config)

  vlan 8 smart huawei(config)

  port vlan 8 0/19 0 huawei(config)

  interface vlanif 8 huawei(config-if-vlanif8)

  ip address 192.168.50.1 24 huawei(config-if-vlanif8)

  quit  Configure the inband management VLAN and IP address of the ONU. Set the static IP address of the ONU to 192.168.50.2/24 and the management VLAN ID to 8 (the same as the management VLAN of the OLT). huawei(config)

  interface gpon 0/3 huawei(config-if-gpon-0/3)

  ont ipconfig 1 1 static ip-address 192.168.50.2 mask 255.255.255.0 vlan 8  Configure an inband management service port. Set the management service port ID to 0, management VLAN ID to 8, GEM port ID to 0, and CVLAN ID to 8. The rate of the inband service port on the OLT is not limited. Therefore, use traffic profile 6 (default). To limit the rate of the service port, run the traffic table ip command to add a traffic profile and bind it to the service port. huawei(config)

  service-port 0 vlan 8 gpon 0/3/1 ont 1 gemport 0 multi-service user-vlan 8 rx-cttr 6 tx-cttr 6 10. Confirm that the management channel between the OLT and the ONU is available.  On the OLT, run the ping 192.168.50.2 command to check the connectivity to the ONU. ICMP ECHO-REPLY packets from the ONU should be received.  You can remote log in to the ONU from the OLT to perform the configuration. 11. Create a service port. Configure the port ID of the HSI service to 1, SVLAN ID to 100, GEM port ID to 1, CVLAN ID to 100, and configure the port ID of the interactive TV service to 2, SVLAN ID to 101, GEM port ID to 2, CVLAN ID to 101. Rate limitation for upstream and downstream packets is performed on the MDU instead of on the OLT. Therefore, use traffic profile 6 (default). To limit the rate of the service port, run 7

• 8. ip command to add a traffic profile and bind it to the service port. The CVLAN must be the same as the upstream VLAN of the ONU. huawei(config)

  service-port 1 vlan 100 gpon 0/3/1 ont 1 gemport 1 multi-service user-vlan 100 rx-cttr 6 tx-cttr 6 huawei(config)

  service-port 2 vlan 101 gpon 0/3/1 ont 1 gemport 2 multi-service user-vlan 101 rx-cttr 6 tx-cttr 6 12. Configure queue scheduling. Use the 3PQ+5WRR queue scheduling. Queues 0-4 use the WRR mode, with the weights of 10, 10, 20, 20, and 40 respectively; queues 5-7 use the PQ mode. The service priority is 4, using the WRR scheduling. Queue scheduling is a global configuration. Configure queue scheduling on the OLT only once, and then the configuration takes effect globally. In subsequent service configurations, you do not need to configure queue scheduling. huawei(config)

  queue-scheduler wrr 10 10 20 20 40 0 0 0 Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map queues 0-7 respectively. For the service board that supports only four queues, the mappings between 802.1p priorities and queue IDs are as follows: priorities 0 and 1 map queue 1; priorities 2 and 3 map queue 2; priorities 4 and 5 map queue 3; priorities 6 and 7 map queue 4. huawei(config)

  cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 13. Save the data. huawei(config)

  save Configure the ONU to provide services automatically. The CNU can automatically provide services after going online. No additional service configuration operation is required and therefore the service provisioning efficiency is improved. NOTE: Because the management VLAN and the management IP address have been configured, you can remote log in to the ONU from the OLT to perform the configuration.  Log in to the ONU to perform the configuration. On the OLT, you can remote log in to the ONU to perform the configuration. The user name is root (default) and the password is mduadmin (default).  Confirm an automatically discovered CNU. Services are automatically provided after the CNU is automatically discovered. huawei(config)

  interface eoc 0/1 huawei(config-if-eoc-0/1)

  cnu auto confirm all  Create an SVLAN. 8

• 9. ID of the HSI service to 100, the VLAN type to smart, and the attribute to stacking, and add uplink port 0/0/0 to this VLAN. Set the VLAN ID of the interactive TV service to 101, the VLAN type to smart, and the attribute to common, and add uplink port 0/0/0 to this VLAN. huawei(config)

  vlan 100-101 smart huawei(config)

  vlan attrib 100 stacking huawei(config)

  vlan attrib 101 common huawei(config)

  port vlan 100-101 0/0 0  Create a profile for automatic service provisioning by the CNU. Configure the HSI service profile ID to 1, service VLAN ID to 100, CNU port ID to 1, and traffic profile to 3. huawei(config)

  cnu auto-service-profile add 1 vlan 100 eth 1 inbound traffic-table index 3 outbound traffic-table index 3 Configure the interactive TV service profile ID to 1, service VLAN ID to 100, CNU port ID to 1, and traffic profile to 3. huawei(config)

  cnu auto-service-profile add 1 vlan 101 eth 2 inbound traffic-table index 4 outbound traffic-table index 4 Configure the ONU to provide services through manual operations. Users must manually configure services after the CNU goes online. NOTE: Because the management VLAN and the management IP address have been configured, you can remote log in to the ONU from the OLT to perform the configuration. 1. Log in to the ONU to perform the configuration. On the OLT, you can remote log in to the ONU to perform the configuration. The user name is root (default) and the password is mduadmin (default).  Optional: Configure a line profile for the EoC head end module. A line profile is generally not required for the EoC head end module because the default line profile 1 is automatically bound to the head end module port. For details about how to customize a line profile, see Configuration Guide of the ONU. The default profile is used in this example.  Optional: Configure a CNU line profile. A CNU line profile is generally not required because the default line profile 1 is automatically bound to the CNU. For details about how to customize a line profile, see Configuration Guide of the ONU. The default profile is used in this example. 2. Add a CNU to an ONU. Assume that a CNU ID is 0, the CNU SN is hwhw-12341234, the bound line profile is 1, the description added to the CNU is huaweicnu, and the CNU alarm reporting function is disabled by default. To connect this CNU to EoC head end module port 0/1/0, you can use two methods: add a CNU offline and confirm an automatically 9

• 10. Add an CNU offline. If the CNU SN is known, run the cnu add command to add the CNU offline. huawei(config)

  interface eoc 0/1 huawei(config-if-eoc-0/1)

  cnu add 0 0 sn-auth hwhw-12341234 lineprofile-id 1 desc huaweicnu huawei(config-if-eoc-0/1)

  quit  Confirm an automatically discovered CNU. If the CNU SN is unknown, run the cnu auto confirm command in EoC mode to enable the CNU automatic discover function on the EoC port. huawei(config)

  interface eoc 0/1 huawei(config-if-eoc-0/1)

  cnu auto confirm all 3. Create an SVLAN. Set the VLAN ID of the HSI service to 100, the VLAN type to smart, and the attribute to stacking, and add uplink port 0/0/0 to this VLAN. Set the VLAN ID of the interactive TV service to 101, the VLAN type to smart, and the attribute to common, and add uplink port 0/0/0 to this VLAN. huawei(config)

  vlan 100-101 smart huawei(config)

  vlan attrib 100 stacking huawei(config)

  vlan attrib 101 common huawei(config)

  port vlan 100-101 0/0 0 4. Configure the traffic profile. Run the display traffic table ip command to query the traffic profiles in the system. If the traffic profiles in the system do not meet requirements, run the traffic table ip command to add a traffic profile. This example uses the default traffic profile. huawei(config)

  display traffic table ip from-index 0 { |to-index }: Command: display traffic table ip from-index 0 -------- TID CIR(kbps) CBS(bytes) PIR(kbps) PBS(bytes) Pri Copy-policy Pri-Policy -------- 0 512 18384 1024 36768 6 - tag-pri 1 1024 34768 2048 69536 0 - tag-pri 2 2048 67536 4096 135072 0 - tag-pri 3 4096 133072 8192 266144 4 - tag-pri 4 8192 264144 16384 528288 4 - tag-pri 5 16384 526288 32768 1024000 4 - tag-pri 6 off off off off 0 - tag-pri 10

• 11. : 7 5. Create a service port and bind it to a traffic profile. VLAN tags are switched for the HSI service. The outer VLAN tag, or SVLAN tag, identifies OLT+PON port+services, and the inner VLAN tag, or CVLAN tag, identifies CNU+ONU ID. huawei(config)

  service-port 1 vlan 100 eoc 0/1/0 cnu 0 eth 1 multi-service user-vlan untagged inbound traffic-table index 3 outbound traffic-table index 3 huawei(config)

  stacking label service-port 100 2 CVLAN to SVLAN tag switching is performed for the interactive TV service. The S-VLAN identifies services. huawei(config)

  service-port 2 vlan 101 eoc 0/1/0 cnu 0 eth 2 multi-service user-vlan untagged inbound traffic-table index 4 outbound traffic-table index 4 6. Configure the user account security. The PITP P mode can be enabled to protect the user account against theft and roaming. huawei(config)

  pitp enable pmode Save the data. huawei(config)

  save Result  The users connected to port 1 on the CNU can use the HSI service.  The users connected to port 2 on the CNU can use the interactive TV service. NOTE: The users connected to LAN ports can use the Internet access service or interactive TV service based on requirements, regardless of whether the CNU provides two or four ports. The procedure for configuring the EoC broadband services on the CNU with four ports is the same as the preceding procedure for configuring the EoC broadband services on the CNU with two ports. Configuration File Configure the OLT. vlan 100-101 smart vlan attrib 100 common vlan attrib 101 common port vlan 100-101 0/19 0 vlan 8 smart port vlan 8 0/19 0 11

• 12. ip address 192.168.50.1 24 quit dba-profile add profile-name PrivateLine type3 assure 20480 max 51200 ont-lineprofile gpon profile-id 10 tcont 5 dba-profile-name PrivateLine gem add 0 eth tcont 5 priority-queue 3 gem add 1 eth tcont 5 priority-queue 3 gem add 2 eth tcont 5 priority-queue 3 mapping-mode vlan gem mapping 0 0 vlan 8 gem mapping 1 1 vlan 100 gem mapping 2 2 vlan 101 commit quit interface gpon 0/3 port 1 ont-auto-find enable display ont autofind 1 ont confirm 1 ontid 1 sn-auth 48575443E6D8B541 snmp ont-lineprofile-id 10 desc MA5631_0/3/1/1_lineprofile10 ont ipconfig 1 1 static ip-address 192.168.50.2 mask 255.255.255.0 vlan 8 ont alarm-profile 1 1 profile-id 1 service-port 0 vlan 8 gpon 0/3/1 ont 1 gemport 0 multi-service user-vlan 8 rx-cttr 6 tx-cttr 6 service-port 1 vlan 100 gpon 0/3/1 ont 1 gemport 1 multi-service user-vlan 100 rx-cttr 6 tx-cttr 6 service-port 2 vlan 101 gpon 0/3/1 ont 1 gemport 2 multi-service user-vlan 101 rx-cttr 6 tx-cttr 6 queue-scheduler wrr 10 10 20 20 40 0 0 0 cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7 save Configure the ONU to provide services automatically. interface eoc 0/1 cnu auto confirm all vlan 100-101 smart port vlan 100-101 0/0 0 cnu auto-service-profile add 1 vlan 100 eth 1 inbound traffic-table index 3 outbound traffic-table index 3 cnu auto-service-profile add 1 vlan 101 eth 2 inbound traffic-table index 4 outbound traffic-table index 4 Configure the ONU to provide services through manual operations. 12
• 13. cnu add 0 0 sn-auth hwhw-12341234 lineprofile-id 1 desc huaweicnu quit vlan 100-101 smart port vlan 100-101 0/0 0 vlan service-profile profile-id 1 vlan service-profile profile-id 2 commit quit vlan bind service-profile 100 profile-id 1 vlan bind service-profile 101 profile-id 2 service-port 1 vlan 100 eoc 0/1/0 cnu 0 eth 1 multi-service user-vlan untagged inbound traffic-table index 3 outbound traffic-table index 3 service-port 2 vlan 101 eoc 0/1/0 cnu 0 eth 2 multi-service user-vlan untagged inbound traffic-table index 4 outbound traffic-table index 4 pitp enable pmode save The more information about technical support you can consult with our engineer - Bill, and his e-mail address is as below: [email protected] More related topics Basic Layout of OLT How to Configure the VPLS Multicast Service? Example for Configuring Local Attack Defense How to Add and Delete ONT on the OLT Device? MA5600T and MA5603T ADSL2+ Service Board Specifications More Huawei products and Reviews you can visit: http://www.huanetwork.com/blog Huanetwork.com is a world leading Huawei networking products supplier, we supply original new Huawei networking equipments, including Huawei switches, Huawei routers, Huaweisymantec security products, Huawei IAD, Huawei SFP and other Huawei networking products. Our customers include telecom operators, Huawei resellers, ISP and system integrators. Right now most of our sales are contributed by regular customers. In Huanetwork Lab, also we have Huawei OLT, MDU, DSLAM and switch for customer do remote testing, any potential customer are welcome to login to our lab. If you need a total Huawei FTTx solution or Huawei ADSL solution for your network, also you may feel free to contact us. 13
• 14. Telephone: +852-30501940 Email: [email protected] Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong 14