Which command verifies whether any ipv6 acls are configured on a router?

Consider the following configuration guidelines for IPv6 ACLs:

• IPv4 source guard and IPv6 ACLs are supported together on the same device, as long as they are not configured on the same port or virtual Interface.
• IPv6 ACLs do not support ACL filtering based on VLAN membership or VE port membership.
• IPv6 ACLs cannot be used with GRE.
• IPv6 ACLs cannot be employed to implement a user-based ACL scheme.
• If an IPv6 ACL has the implicit deny condition, make sure it also permits the IPv6 link-local address, in addition to the global unicast address. Otherwise, routing protocols such as OSPF will not work. To view the link-local address, use the show ipv6 interface command.
• IPv6 must be enabled on the interface or an IPv6 address must be configured on the interface before an ACL can be applied to it.
• (Router image only) If an ACL is applied on a VLAN physical port, if you need to change VLAN membership, you first need to remove the ACL.
• On interfaces that have IPv6 ACLs applied on outbound packets, the following features are not supported:
  • ACL mirroring
  • ACL accounting
  • (Ruckus ICX 7150) ACL logging
  • Traffic policies
  • Internal priority marking

Nuevo ComentarioÚltimos Comentarios

No hay ningún comentario sobre este test.

Refer to exhibit. An engineer is configuring the New York router to reach the Lo1 interface of the Atlanta router using interface S0/0/0 as the primary path. Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two) ipv6 route 2000::1/128 2012::1 5 ipv6 route 2000::1/128 2023::3 5 ipv6 route 2000::1/128 2023::2 5 ipv6 route 2000::1/128 2012::2 ipv6 route 2000::1/128 2012::1.
Refer to the exhibit. The New York router is configured with static routes pointing to the Atlanta and Washington sites. Which two tasks must be performed so that the Serial0/0/0 interfaces on the Atlanta and Washington routers can reach one another? (Choose two) Configure the ipv6 route 2012::/126 2023::1 command on the Washington router Configure the ipv6 route 2023::/126 2012::1 command on the Atlanta router Configure the ipv6 route 2023::/126 2012::2 command on the Atlanta router Configure the ipv6 route 2012::/126 s0/0/0 command on the Atlanta router Configure the ipv6 route 2012::/126 2023:2 command on the Washington router.
Which command verifies whether any IPv6 ACLs are configured on a router? show access-list show ipv6 route show ipv6 access-list show ipv6 interface.
Refer to exhibit. The loopback1 interface of the Atlanta router must reach the loopback3 interface of the Washington router. Which two static host routes must be configured on the NEW York router? (Choose two) ipv6 route 2000::3/128 2023::3 ipv6 route 2000::1/128 2012::1 ipv6 route 2000::1/128 2012::2 ipv6 route 2000::3/128 s0/0/0 ipv6 route 2000::1/128 s0/0/1.
Which command automatically generates an IPv6 address from a specified IPv6 prefix and MAC address of an interface? ipv6 address autoconfig ipv6 address 2001:068:5:112:2/64 link-local ipv6 address 2001:068:5:112::64 eui-64 ipv6 address dhcp.
Which IPv6 address type provides communication between subnets and cannot route on the Internet? multicast unique local link-local global unicast.
What is the expected outcome when an EUI-64 address is generated? The characters FE80 are inserted at the beginning of the MAC address of the interface The MAC address of the interface is used as the interface ID without modification The seventh bit of the original MAC address of the interface is inverted The interface ID is configured as a random 64-bit value.
Which command is used to configure an IPv6 static default route? ipv6 route 0.0.0.0/0 interface next-hop ipv6 route default interface next-hop ipv6 route ::/0 interface next-hop ip route 0.0.0.0/0 interface next-hop.
Which action must be taken to assign a global unicast IPv6 address on an interface that is derived from the MAC address of that interface? configure a stateful DHCPv6 server on the network explicitly assign a link-local address disable the EUI-64 bit process enable SLAAC on an interface.
Which IPv6 address block forwards packets to a multicast address rather than a unicast address? FE80::/10 FF00::/12 FC00::/7 2000::/3.
Which type of IPv6 address is publicly routable in the same way as IPv4 public addresses? global unicast muticast unique local link-local.
When configuring IPv6 on an interface, which two IPv6 multicast groups are joined? (Choose two) FF02::1 FF02::2 2002::5 FC00::/7 2000::/3.
Refer to the exhibit. An engineer configured the New York router with static routes that point to the Atlanta and Washington sites. Which command must be configured on the Atlanta and Washington routers so that both sites are able to reach the loopback2 interface on the New York router? ipv6 route 0/0 Serial 0/0/0 ip route 0.0.0.0.0.0.0.0 Serial 0/0/0 ipv6 route ::/0 Serial 0/0/1 ipv6 route ::/0 Serial 0/0/0 ipv6 route ::/0 2000::2.
Which IPv6 address block sends packets to a group address rather than a single address? OR Which IPv6 address block forwards packets to a multicast address rather than a unicast address? FC00::/7 FF00::/12 FE80::/10 2000::/3.

Which command is used to apply an IPv6 ACL to an interface?

Which command is used to create IPv6 access

What is the difference between IPv4 ACLs and IPv6 ACLs?

Should IPv4 and IPv6 ACLs be populated simultaneously?